Extension Bar Set Handy Chain Saw LEADMORE Series Angle Cut Chisel & Punch Set T-Hex Nut Cranker Leather Punch Set Floor Covering Tools Bits, sockets, screw drivers
Hardware | Handtool | About us | Contact us | Home

An energy saving vehicle Lug Nut Ratchet Wrench can increase 4 times of strength and loosen lug nut easily. The operation is so easy even girls and elderly can operate without any problem.

* Made from chrome vanadium alloy steel with anti-slip handle.
* Tire cover removal tip on the opposite end.
* Can tighten and loosen lug nut.
* Packaged with sockets in pouch, blow case or in blister card.

No more need for extension bar

No need for extra force

Designed to fit various nut sizes
such as 17,19,21 & 22mm

1. Select socket from blow mold case that best fits on wheel.

Snap this socket on drive "A" Snap larger size socket on B.

2. Make sure the ratchet tab is set in the loosening direction.

Normally this is counterclockwise, and it is set that way at the factory. To make sure the tab is set correctly, turn the tab as far as it will go in the opposite direction.

3. Place the drive "A" socket on nut "A" and the drive "B" socket on an adjacent nut "B" to either side of nut "A".

Rotate sockets slightly if necessary to align them with nuts.

4. While holding wrench in place with one hand, rotate handle clockwise (opposite to loosening) with other hand until ratchet "clicks".

 

5. Turn handle counterclockwise to loosen nut. Repeat step 4 and 5 until nut can be removed by hand.